Wallguide facade greenery systems

Wallguide mounting sets

There are a couple of mounting sets available, which can be expanded as needed. You can find installation instructions here.

• Wallguide inox Basic. This set has spacers with a length of 95 mm. A good quality Wallguide set for a competitive prize, which can be used for straight wires as well as crossing wires.
• Wallguide AluGreen Medium. These set contain spacers with a length of 150. It can be used for straight wires as well as crossing wires. The wires must be guided the openings closest to each other. This ensures that the wires don’t cross in the middle of the spacer. Only then will the Allen bolt secure the wires properly.
• Wallguide inox Solid, this set has a 120 mm spacer and can be used for straight wires as well as crossing wires.
• Wallguide inox Robust cross is used for both straight and crossing lines. To create crossing lines allow the upward or downward wire to bend at right angles in the adjacent hole. This is the only way to secure the screw cap in the spacer.

Wallguide additional extensions

Besides the mounting sets you will need additional parts, what you need may vary per project. The thing you of course always need is rope. This inox or stainless steel wire is available both per meter or per roll of 50 meters length. Use a tread terminal to secure the wire.

If you use plants that are not self-winding, or self-adhesive, like rambler roses, it is advisable to use climber stud, available in an aluminium and an plastic type. Wen you are going to use powerful climbers like Wisteria  it is advisable to secure both ends of the rope to the wall with the loop clamp ring and eye nut.

Tip: When powerful climbers are used, be sure that you leave extra wire at the bottom. By doing so you can take tension from the rope every now and then to prevent the Wallguide system or the wall being damaged.